Page 3 - 弘祿電子型錄

安規及系統認證
本公司產品獲得各項安規及系統認證
ReliabilityLaboratory
TEST REPORT
ReportNo.: HC80183/2016 Page: 1 of 6
Date:
August 29, 2016
HONG LU CO., LTD.
11, GONGYE 1ST RD., PING-CHEN DIST., TAOYUAN CITY, TAIWAN
The following merchandise was submitted and identified by the vendor as:
Product Description: Style/ Item No.: Manufacturer/ Vendor: Country of Origin: Quantity:
Testing Period:
EC-Motor (3 speed) for FCU ECM-D98-3S/ No.1
Hong Lu Co., Ltd.
Taiwan
Total 1 piece
Aug. 24, 2016 to Aug. 25, 2016
We have tested the submitted sample(s) as requested and the following results were obtained: Test Required:
IP Code
First characteristic numeral
Second characteristic numeral
IP54
Degrees of protection against access to hazardous
parts and against solid foreign objects Degrees of protection against ingress of water
Test Results:
Test for Degrees of Protection Provided by Enclosures (IEC 60529 Edition 2.2: 2013)
Conclusion
Submittals sample(s) comply with the requirement and acceptance conditions of IEC 60529 Edition 2.2: 2013 Degrees of Protection Provided by Enclosures -- IP54. The detailed description of test result, please see attached sheet(s).
Signed for and on behalf of SGS TAIWAN Ltd.
Winson Tseng
Asst. Manager
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retadinfeor 90 days only. This test report cannot be reproduced, except in full, without prior
written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留 90 天。本報告未經本公司書面許可，不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on requesctcoerssaible at www.sgs.com/terms_and_conditions.htmand, for electronic format documents, subject to Terms and Conditions for Electronic Documents awtww.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s finsdiantgthe time of its intervention only and wtihin the limits of Client’s instructions, if
any. The Company’s sole responsibility is to its Client and thisdocument does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthltoeraiztieodn,aforgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
No.31, No.33, No.35, Wu Chyuan Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五權路 31 號, 33 號, 35 號 SGS Taiwan Ltd. No.134, Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134 號
台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2299-9558 www.tw.sgs.com Member of SGS Group
Certificate of Registration
This certifies that the Quality Management System of
Hong Lu Co., Ltd.
No.11, Gongye 1st Road, Pingzhen District, Taoyuan, Taiwan
has been assessed by NSF-ISR and found to be in conformance to the following standard(s):
ISO 9001:2015
Scope of Registration:
Design and manufacture of fan wheel and motors.
Certificate Number: Certificate Issue Date: Registration Date: Expiration Date *:
0401-IS6 09-AUG-2018 09-AUG-2018 08-AUG-2021
Carl Blazik,
Director, Technical Operations & Business Units, NSF-ISR, Ltd.
Certificate: Project: Issued to:
1147339
70170562
Hong Lu Co. Ltd. Chung-Cheng Lin
No. 11 Gongye 1st Rd Ping-Chen City Tanyuan, 32461 TAIWAN
Attention: Mr. Chung-Cheng Lin
Master Contract: 208328
Certificate of Compliance
The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US (indicating that products have been manufactured to the requirements of both Canadian and US Standards) or with adjacent indicator 'US' for US only or without either indicator for Canada only
Issued by:
PRODUCTS
CLASS 4211 01 - MOTORS AND GENERATIORS
CLASS 4211 81 - MOTORS AND GENERATIORS – CERTIFIED TO U.S. STANDARDS
Ventilator motor, thermally protected:
Group 1: Series A4 and A6, 3 pieces housing assembly, open or enclosed, single or twin shaft, Ins. Cl. F, 1ph 250V max. Or 3 ph, 600V max., 50/60Hz, 4, 6, 8, 10 or 12 poles, 185W-1550W.
Group 2: Series D, 2 pieces housing assembly, open or enclosed, single or twin shaft, Ins. Cl. B, 1ph 250V max., 50/60Hz, 4 or 6 poles, 25W-150W.
Group 3: Series F, 3 pieces housing assembly, open or enclosed, single or twin shaft, Ins. Cl. B, 1ph 250V max. Or 3 ph, 600V max., 50/60Hz, 4 or 6 poles, 15W-1105W.
Date Issued:
2018-06-29
Jeffrey Chen
Note:
1. Complete model designation of the motors consists of the frame size with or without prefixes and with or
without suffixes indicating construction details. DQD 507 Rev. 2016-02-18 Reaffirmed 2018-04-09
FF0 002
Page 1
Certificate: Project: Issued to:
70170561
70170561
Hong Lu Co. Ltd.
No. 11 Gongye 1st Rd, Ping-Chen City Tanyuan, 32461 TAIWAN
Attention: Chung-Cheng Lin
Master Contract: 208328
Certificate of Compliance
The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only, and
Issued by:
PRODUCTS
CLASS 4211 31 - MOTORS AND GENERATORS -Sub-Assemblies - Component Acceptance
CLASS 4211 91 - MOTORS AND GENERATORS -Sub-Assemblies - Component Acceptance - US Standards
Electronically Commutated Motor, Component Type, input ratings to electronic speed control, 3 phase, double or single shaft, Insulation Class B, Model: MEC-X-120-X-X-X-X, 235Vdc, 0.57A, 120W, 0.96 N-m, 1200RPM.
Date Issued:
2018-04-27
Jeffrey Chen
APPLICABLE REQUIREMENTS
CSA-C22.2 No. 100-14 - UL 1004-1, 2nd Edition -
DQD 507 Rev. 2016-02-18 Reaffirmed 2018-04-09
Motors and Generators
Rotating Electrical Machines- General Requirements
Page 1
FF0 008
Letter of Attestation
Document: 70170560 Project: 70170560
Issued to: Hong Lu Co. Ltd.
No. 11 Gongye 1st Rd Ping-Chen City Tanyuan, 32461 Taiwan
Attention: Chung-Cheng Lin
Master Contract: 208328 Date Issued: June 28, 2018
CSA Group, Certification and Testing hereby confirms that it has completed an evaluation of: AC drive board, Type ED32003XXA00
CSA Group, Certification and Testing hereby attests that the products identified above and described in test report 70170560 dated June 28, 2018
complies with the following standards/tests, to the extent applicable:
CSA C22.2 no. 274-17, Second Edition, Dated April, 2017 UL 508C, Fourth Edition, Dated May 16, 2016
Issued by: Jeffrey Chen ----------------------------------------------------
Certifier
THIS LETTER OF ATTESTATION DOES NOT AUTHORIZE THE USE OF THE CSA MARK ON THE SUBJECT PRODUCTS.
QUOTATIONS FROM THE TEST REPORT OR THE USE OF THE NAME OF THE CANADIAN STANDARDS ASSOCIATION AND CSA GROUP OR ITS REGISTERED TRADEMARK, IN ANY WAY, IS NOT PERMITTED WITHOUT PRIOR WRITTEN CONSENT OF THE CANADIAN STANDARDS ASSOCIATION OPERATING AS CSA GROUP, CERTIFICATION AND TESTING DIVISION.
DQD 507.10 Rev 2018-06-12