台灣鈷領產品型錄

Characteristics – EB 800 screw screw guide pad guide pad insert driver • up to nom. Ø 23.99 mm 4 guide pads • from nom. Ø 24.00 mm 5 guide pads EB 800 – THE FLEXIBLE • up to nom. Ø 52.000mm • inserts and guide pads in 1/10 diameters as standard, in 1/100 diameters as special tools • for each nominal diameter, both the appropriate inserts and interchangeable guide pads must be used Gühring single-fluted gun drills with interchangeable inserts and guide pads are also produced as special tools according to customer requirements. They are suitable for nearly every material and available from diameter 12.000 to 52.000mm up to a maximum total length of 3,600mm. Advantages : • Due to the interchangeable inserts and supporting strips, coatings can be individually applied. • Thanks to the precision interchangeable inserts and guide pads complicated adjustments are no longer necessary • The guide pads and the inner inserts can be mounted larerally inverted, thus providing a doubled tool life. • Small number of exchangeable parts makes construction extremely stable. • From 40.001mm Ø with additional inner cutting edge • Parts can be changed within the machine: expensive downtimes are eliminated. • Less storage space required for tools • User-oriented selection of the insert ensures optimum chip breaking - even with problematic materials. • The nominal diameter can be changed by replacing the exchange parts. • The driver is produced in heat-treatable steel according to: • DIN 6535 HA • DIN 1835 A • DIN 6535 HB • DIN 1835 B • DIN 6535 HE • DIN 1835 E Also, all the forms generally required for deep drilling machines are possible to be manufactured. EB 800 Modular single-fluted gun drills • 切削最大孔徑至 Ø 52mm 。 • 刃徑刀片與導引塊尺寸每 1/10 ，即每隔 0.1mm 為標準規格， 1/100 小數點下 3 位，則為特殊規格。 • 對於每個尺寸，必須使用尺寸正確的刀片與導引塊。 EB 800 刀片替換式槍鑽 鈷領單刃替換式槍鑽也可根據客戶需求來訂製，幾乎所有材料皆能使用，直徑從 12.0mm 到 52.0mm ，總長度最大為 3.6 米。 可以選用適合的塗層來對應加工材質需要 尺寸不需額外調整 用戶選擇正確的斷屑槽刀片，即使在有問題的材料下， 也能確保最佳的斷屑效果。 可以通過更換刀片來更改加工直徑，最多約 0.5mm 。 而且可以依照深孔加工需求來製造刀頭的形式。 導引塊與內側刀片可以雙頭使用，降低成本 替換式零件少，使本體非常穩定 尺寸從 40.001mm 起需額外再加一片內部刀片使用 更換刀片與導引塊可在機上直接更換，不需拆下，節省 停機時間 刀具儲存空間大為降低 柄部根據以下標準以熱處理鋼材製造 • 尺寸 Ø23.99 以內為 4 個導引塊 • 尺寸 Ø24mm 以上為 5 個導引塊 固定螺絲 固定螺絲 導引塊 導引塊 刀片 柄部 4