台灣鈷領產品型錄

GS40 HSS-E-PM 細圓齒型粗銑刀 3322 56 可以自行加鍍層 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 5.70 7.70 9.50 11.50 12.00 15.50 16.00 19.00 57.00 69.00 72.00 83.00 83.00 92.00 92.00 104.00 全長 l 1 mm 刃數 Z d2(h6) 柄徑 mm 3 3 3 3 3 3 3 3 刃長 l 2 mm 6.00 10.00 10.00 12.00 12.00 16.00 16.00 20.00 可切削長 l 3 mm 13.00 19.00 22.00 26.00 26.00 32.00 32.00 38.00 20.00 21.50 30.00 36.00 38.00 42.00 44.00 52.00 844 1,108 1,092 1,242 2,118 2,152 2,980 2,516 價格 d1 刃俓 mm 頸部 d3 mm 20 30 40 50 60 90 100 200 鍍層加價 GS40 HSS-E-PM 細圓齒型粗銑刀 3340 可以自行加鍍層 全長 l 1 mm 刃數 Z d2(h6) 柄徑 mm 刃長 l 2 mm 可切削長 l 3 mm 價格 d1 刃俓 mm 頸部 d3 mm 20 25 30 35 40 45 50 55 60 75 90 100 200 300 400 500 600 鍍層加價 無鍍層 無鍍層 6.00 7.00 8.00 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 18.00 20.00 25.00 28.00 30.00 32.00 5.70 6.70 7.70 8.70 9.50 10.50 11.50 12.00 12.00 12.00 15.50 16.00 19.00 24.00 25.00 25.00 31.00 57.00 66.00 69.00 69.00 72.00 79.00 83.00 83.00 83.00 83.00 92.00 92.00 104.00 121.00 121.00 121.00 133.00 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.00 10.00 10.00 10.00 10.00 12.00 12.00 12.00 12.00 12.00 16.00 16.00 20.00 25.00 25.00 25.00 32.00 13.00 16.00 19.00 19.00 22.00 22.00 26.00 26.00 26.00 26.00 32.00 32.00 38.00 45.00 45.00 45.00 53.00 20.00 17.90 21.50 24.30 30.00 30.70 36.00 38.00 38.00 38.00 42.00 44.00 52.00 63.00 65.00 65.00 71.00 477 680 502 777 534 825 583 955 874 1,424 955 1,424 1,165 2,654 3,626 3,884 3,755 ISO Code Hardness Feed depth a p Feed width a e Cutting speed v c fz(mm/z)with nom. ø 3 6 8 10 12 16 20 25 P Steel M Stainless steel K Cast mat. N Aluminium 850 - 2 1400 N/mm 2 ≤ 850 N/mm 2 ≤ 750 N/mm 2 ≥ 750 N/mm ≥ 240 HB 30 ≤ 7% Si 2xd 2xd 2xd 2xd 2xd 2xd 0.5xd 0.4xd 0.4xd 0.4xd 0.4xd 0.25xd 65 55 55 50 40 150 0.014 0.024 0.032 0.04 0.048 0.056 0.072 0.104 0.012 0.016 0.032 0.041 0.054 0.063 0.081 0.09 0.012 0.024 0.032 0.04 0.048 0.056 0.072 0.104 0.012 0.014 0.022 0.027 0.036 0.054 0.045 0.063 0.016 0.024 0.032 0.04 0.048 0.072 0.056 0.104 0.018 0.027 0.036 0.045 0.054 0.081 0.063 0.12 * good cooling is recommended for optimal chip evacuation and tool life ** for slotting the cutting speed and feed rate should be reduced by 40 % All recommendations are valid for coated tools. For bright milling cutters please V c -40% and f z -25%!